Circular Saw

Buy Circular Saw ? You can see reviews Here!!!

Forrest MM09802 Miter Master 9-Inch 80 Tooth 5/8-Inch Arbor .105-Inch Kerf Aluminum Cutting Circular Saw Blade

The Forrest MM09802 Circular Saw Blade is an all-purpose blade for table saws that leaves edges ready to use with minimal planing and sanding. The Forest MM09802 Blade is double hard for a longer cutting life and made for cutting thin, low pressure, two-sided laminates, plywood & fine cross cutting on all woods between 1- [...]

Forrest MM10807 Miter Master 10-Inch 80 Tooth 5/8-Inch Arbor .105-Inch Kerf Aluminum & Wood Circular Saw Blade

From the Manufacturer Forrest’s blades offer a superior cut that leaves a rip-cut saw edge that is as smooth as if it had been sanded, and a cross-cut edge that is almost mark-free. The blades run very quietly, and backside tearout in plywood is negligible. Each blade is virtually hand-made. The plate is hand-tensioned (up [...]

Forrest MM12802 Miter Master 12-Inch 80 Tooth 5/8-Inch Arbor .105-Inch Kerf Aluminum Cutting Circular Saw Blade

From the Manufacturer Forrest’s blades offer a superior cut that leaves a rip-cut saw edge that is as smooth as if it had been sanded, and a cross-cut edge that is almost mark-free. The blades run very quietly, and backside tearout in plywood is negligible. Each blade is virtually hand-made. The plate is hand-tensioned (up [...]

Forrest NM168011180 No Melt 16-Inch 80 Tooth 1-Inch Arbor .180-Inch Kerf Plastic Cutting Circular Saw Blade

From the Manufacturer Forrest’s blades offer a superior cut that leaves a rip-cut saw edge that is as smooth as if it had been sanded, and a cross-cut edge that is almost mark-free. The blades run very quietly, and backside tearout in plywood is negligible. Each blade is virtually hand-made. The plate is hand-tensioned (up [...]

Forrest NM106011100 No Melt 10-Inch 60 Tooth 5/8-Inch Arbor 3/32-Inch Kerf Plastic Cutting Circular Saw Blade

From the Manufacturer Forrest’s blades offer a superior cut that leaves a rip-cut saw edge that is as smooth as if it had been sanded, and a cross-cut edge that is almost mark-free. The blades run very quietly, and backside tearout in plywood is negligible. Each blade is virtually hand-made. The plate is hand-tensioned (up [...]

keep looking »