Circular Saw

Buy Circular Saw ? You can see reviews Here!!!

Freud D1080X Diablo 10-Inch 80-tooth ATB Finish Saw Blade with 5/8-Inch Arbor and PermaShield Coating

For a blade dedicated to cutting ultra-fine finish work with remarkably clean, chip-free results, look no further than the Freud D1080X Diablo 10-Inch Ultra-Fine-Finish Saw Blade. Ideal for fine cabinetmaking, this is your go-to blade for slicing through oak, pine, melamine, veneer plywood, and delicate molding. For strong, long-lasting resistance, the blades feature a tough [...]

Forrest NM106011100 No Melt 10-Inch 60 Tooth 5/8-Inch Arbor 3/32-Inch Kerf Plastic Cutting Circular Saw Blade

From the Manufacturer Forrest’s blades offer a superior cut that leaves a rip-cut saw edge that is as smooth as if it had been sanded, and a cross-cut edge that is almost mark-free. The blades run very quietly, and backside tearout in plywood is negligible. Each blade is virtually hand-made. The plate is hand-tensioned (up [...]

Forrest NM108011125 No Melt 10-Inch 80 Tooth 5/8-Inch Arbor 1/8-Inch Kerf Plastic Cutting Circular Saw Blade

From the Manufacturer Forrest’s blades offer a superior cut that leaves a rip-cut saw edge that is as smooth as if it had been sanded, and a cross-cut edge that is almost mark-free. The blades run very quietly, and backside tearout in plywood is negligible. Each blade is virtually hand-made. The plate is hand-tensioned (up [...]

Forrest DH101007100 Duraline HI-A/T 10-Inch 100 Tooth 5/8-Inch Arbor .100-Inch Kerf Melimine & Plywood Cutting Circular Saw Blade

From the Manufacturer Forrest’s blades offer a superior cut that leaves a rip-cut saw edge that is as smooth as if it had been sanded, and a cross-cut edge that is almost mark-free. The blades run very quietly, and backside tearout in plywood is negligible. Each blade is virtually hand-made. The plate is hand-tensioned (up [...]

Oshlun SBNF-100100 10-Inch 100 Tooth TCG Saw Blade with 5/8-Inch Arbor for Aluminum and Non Ferrous Metals

From the Manufacturer Our non ferrous metal blades have been designed with precision ground micro grain tungsten carbide tips and a triple chip tooth configuration. The specially formulated carbide lasts longer and leaves clean, burr free cuts in all types of non ferrous metals such as aluminum, copper, brass, bronze and even some plastics. The [...]

keep looking »